4WE6

4WE6 Directional Valves

Working pressure of rexroth 4we6 Directional Valves is 32Mpa,the same as NG3 valve and Cetop3 valve.4we 6 directional valve are usually used for changing the oil flow direction of hydraulic power,hydraulic working system and industrial hydraulic system.
4/3, 4/2 4we rexroth Type WE directional valves take use of wet-pin DC or AC voltage solenoids.
Size 6 Hydraulic Solenoid Valve
Component series is 6X (60~69)
The maximum operating pressure is 350 bar
The maximum flow is 80 l/min-DC Voltage Solenoids.
60 l/min using AC Voltage solenoids.
PDF

Ordering Code

Symbol

1)Example:
Spool symbol E with spool position “a”, ordering code ..EA..
2)Symbol E1-: P-A/B pre-opening,
Caution in conjunction with single-rod cylinders due to pressure intensification!

Performance limits(measured with HLP46 θoil = 40℃±5℃ [104℉±9℉])

Attention!

The specified switching performance limits are valid for operation with two directions of flow(e.g. from P to A and simultaneous return flow from B to T).
Due to the flow forces acting within the 4WE6 Rexroth valves,the permissible switching performance limits may be considerably lower with only one direction of flow(e.g. from P to A while port B is blocked)!
In such cases, please contact us!
The switching performance limit was establised while the solenoids were at operating temperature, at 10% undervoltage and without tank pre-loading.